# changelog

author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.40-2
changelog:
  - update license tag format (SPDX migration) for https://fedoraproject.org/wiki/Changes/SPDX_Licenses_Phase_1


author: Justin M. Forbes <jforbes@fedoraproject.org> [6.10.1-0]
changelog:
  - Initial set up for stable Fedora branch (Justin M. Forbes)
  - Reset RHEL_RELEASE for the 6.11 cycle (Justin M. Forbes)
  - redhat/configs: Enable CONFIG_VMWARE_VMCI/CONFIG_VMWARE_VMCI_VSOCKETS for RHEL (Vitaly Kuznetsov)
  - Linux v6.10.1


author: Justin M. Forbes <jforbes@fedoraproject.org> [6.10.3-0]
changelog:
  - Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanning (Luiz Augusto von Dentz)
  - Linux v6.10.3


author: Justin M. Forbes <jforbes@fedoraproject.org> [6.10.4-0]
changelog:
  - wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion (Janne Grunau)
  - New config for 6.10.3 (Justin M. Forbes)
  - Linux v6.10.4


author: Justin M. Forbes <jforbes@fedoraproject.org> [6.10.5-0]
changelog:
  - Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error" (Niklas Cassel)
  - Linux v6.10.5


author: Justin M. Forbes <jforbes@fedoraproject.org> [6.10.6-0]
changelog:
  - Add to BugsFixed (Justin M. Forbes)
  - selinux: revert our use of vma_is_initial_heap() (Paul Moore)
  - Linux v6.10.6


author: Augusto Caringi <acaringi@redhat.com> [6.10.7-0]
changelog:
  - KVM: PPC: Book3S HV nestedv2: Keep nested guest HASHPKEYR in sync (Shivaprasad G Bhat)
  - KVM: PPC: Book3S HV: Add one-reg interface for HASHPKEYR register (Shivaprasad G Bhat)
  - KVM: PPC: Book3S HV nestedv2: Keep nested guest HASHKEYR in sync (Shivaprasad G Bhat)
  - KVM: PPC: Book3S HV: Add one-reg interface for HASHKEYR register (Shivaprasad G Bhat)
  - KVM: PPC: Book3S HV nestedv2: Keep nested guest DEXCR in sync (Shivaprasad G Bhat)
  - KVM: PPC: Book3S HV: Add one-reg interface for DEXCR register (Shivaprasad G Bhat)
  - Revert the F39 commits which should not have pushed (Justin M. Forbes)
  - Turn off libbpf dynamic for perf on F39 (Justin M. Forbes)
  - Revert "cpupower: Bump soname version" (Justin M. Forbes)
  - Drop soname for libcpupower.so since we reverted the bump (Justin M. Forbes)
  - Linux v6.10.7


author: Augusto Caringi <acaringi@redhat.com> [6.10.8-0]
changelog:
  - Add to BugsFixed (Augusto Caringi)
  - xfs: xfs_finobt_count_blocks() walks the wrong btree (Dave Chinner)
  - Linux v6.10.8


author: Augusto Caringi <acaringi@redhat.com> [6.10.8-100]
changelog:
  - Turn off libbpf dynamic for perf on F39 (Justin M. Forbes)
  - Revert "cpupower: Bump soname version" (Justin M. Forbes)
  - Drop soname for libcpupower.so since we reverted the bump (Justin M. Forbes)


author: Sérgio Basto <sergio@serjux.com> - 18.0.1-1
changelog:
  - Update ddnet to 18.0.1 (#2258303)
    Mon Jan 22 2024 Packit <hello@packit.dev> - 18.0-1
      - Update config_variables.h (Samuele Radici)
      - Resolves rhbz#2258303


author: Packit <hello@packit.dev> - 18.0.2-1
changelog:
  - Version 18.0.2 (Dennis Felsing)
  - Fix updater issue. Close #7867 (Learath)
  - Resolves rhbz#2260746


author: Packit <hello@packit.dev> - 18.0.3-1
changelog:
  - Version 18.0.3 (Dennis Felsing)
  - Fix client/server updates (Learath)
  - Scale angles using MousePos with zoom (furo)
  - Resolves rhbz#2262556


author: Simone Caronni <scaronni@nvidia.com> - 1.1.14-2.20240805gitc439cd5
changelog:
  - Update to latest snapshot with commits required for NVIDIA driver 560+ with
    explicit sync support.


author: Jonathan Schleifer <js@nil.im> - 4.5.2-1
changelog:
  - Updated to version 4.5.2.
  - Switched to sourceonly tarball.
  - Regenerate pb2 files to lower protobuf requirement.


author: Tomas Korbar <tkorbar@redhat.com> - 2.6.3-1
changelog:
  - Rebase to version 2.6.3
  - Resolves: rhbz#2309690
  - Resolves: CVE-2024-45492
  - Resolves: CVE-2024-45491
  - Resolves: CVE-2024-45490


author: Miroslav Suchý <msuchy@redhat.com> 1.46-1
changelog:
  - rename LicenseRef-Catharon to Catharon
  - add NCL license
  - add HPND-UC-export-US license
  - Add GPL-2.0-only_WITH_cryptsetup-OpenSSL-exception
  - add Sun-PPP-2000 license
  - add BSD-2-clause-first-lines license
  - add pkgconf license


author: Miroslav Suchý <msuchy@redhat.com> 1.47-1
changelog:
  - add GPL-2.0-or-later WITH RRDtool-FLOSS-exception-2.0
  - add text of ultrapermissive dedication from sublimehq
  - add HPND-export2-US license
  - add Gutmann license
  - add HPND-merchantability-variant license
  - fix case in license id of BSD-2-Clause-first-lines
  - add HPND-export-US-acknowledgement license
  - add HPND-Intel license
  - add loguru public domain dedication
  - add BSD-3-Clause WITH AdditionRef-OpenEXR-Additional-IP-Rights-Grant
  - add HPND-sell-variant-MIT-disclaimer-rev license
  - add GD license
  - Add crc32 license found in libsurvive to UltraPermissive
  - allow lower case variant
  - add any-OSI license
  - document dotnet* packages as exception for LicenseRef-ISO-8879


author: Miroslav Suchý <msuchy@redhat.com> 1.50-1
changelog:
  - include scancode-license-policy.yaml in rpm
  - add BSD-3-Clause-No-Nuclear-Warranty license
  - add unicode-mappiing license as not-allowed
  - add LicenseRef-W3C-Document-2023
  - add W3C-20150513 license
  - add 'make scancode' that produces scancode license policy file
  - Add LicenseRef-framed as allowed


author: Miroslav Suchý <msuchy@redhat.com> 1.52-1
changelog:
  - Add LicenseRef-Frontier-Artistic-1.0 as not-allowed
  - Add LicenseRef-JasPer-1.0 as not-allowed
  - Create missing TOML for Callaway Nmap but reclassify as not-allowed, with
    usage exception
  - Add LicenseRef-NPSL-0.92 as not-allowed, corresponding to Callaway-era NPSL
  - Add LicenseRef-NPSL-0.93 as not-allowed to cover NPSL 0.93 and 0.94
  - Correct TOML files for LicenseRef-NPSL-0.94 and LicenseRef-NPSL-0.95
  - Add LicenseRef-NPSL-0.95 as not-allowed


author: Miroslav Suchý <msuchy@redhat.com> 1.53-1
changelog:
  - add HPND-Netrek license
  - Add license text for py-sdl2 Public Domain license
  - remove LicenseRef-framed as ulem license was extended to allow LicenseRef-
    framed variation
  - add HIDAPI license
  - add Ruby-pty license
  - add LicenseRef-OASIS-spec


author: Miroslav Suchý <msuchy@redhat.com> 1.54-1
changelog:
  - public domain dedication found in mailcap
  - public domain dedications found in web server icons
  - replaced obsolescent command with modern equivalent
  - add LicenseRef-compface
  - Add rijndael from sdl-crypto to public domain
  - add public domain dedication for xz
  - Add sha1 from sdl-crypto to public domain
  - correct location of HPND-Netrek.toml


author: Miroslav Suchý <msuchy@redhat.com> 1.55-1
changelog:
  - Split rpmlint-fedora-license-data-legacy from rpmlint-fedora-license-
    data
  - add LicenseRef-IUPAC-InChI-Trust as not allowed
  - add TrustedQSL
  - add TU-Berlin-1.0 license
  - add DocBook-XML license
  - add DocBook-Schema license
  - add AGPL-3.0-or-later WITH PS-or-PDF-font-exception-20170817
  - Extend ISO-8879 exception to dotnet9.0


author: Neal Gompa <ngompa@fedoraproject.org> - 6.0-13
changelog:
  - Add patches to support enhanced RTMP and AV1 encoding through VA-API
  - Force AAC decoding through fdk-aac-free


author: Dan Horák <dan[at]danny.cz> - 3.0.0-1.20230308git7de967c
changelog:
  - updated to ghdl 3.0.0
  - updated to gcc 14.0.1
  - updated to llvm 17
  - Resolves: rhbz#2161618 rhbz#2225826


author: Nicolas Viéville <nicolas.vieville@uphf.fr> - 1:38-25.20231104git0f042e8
changelog:
  - Upgrade from forked github repository for gnome-shell >= 45 - RHBZ#2240571
    https://github.com/mgalgs/gnome-shell-extension-system-monitor-applet
    More information in:
    https://github.com/paradoxxxzero/gnome-shell-system-monitor-applet/issues/795


author: Nicolas Viéville <nicolas.vieville@uphf.fr> - 1:38-30.20240717git4bd03a2
changelog:
  - Updated to last upstream commits
  - Fix sensors labels determinism - RHBZ#2186601
    Thanks to Dominik Mierzejewski
  - Change message shown when no fan/temperature sensor files are found - prefs.js
  - Use template literals in common.js
  - GPU: Un-hardcode /bin/bash location
  - Fix common.js missing from build
  - Update compiled Portuguese locales to resolve permadiff


author: Nicolas Viéville <nicolas.vieville@uphf.fr> - 1:38-32.20240820git81f07ce
changelog:
  - Updated to last upstream commits
  - Focus fan graph on reported range
  - Add option to rotate chart labels
  - Adjust URL accordingly to the switch to the forked github sources repository


author: Nicolas Viéville <nicolas.vieville@uphf.fr> - 1:38-33.20240904git9491649
changelog:
  - Updated to last upstream commits
  - Drop unused compat.js
  - Use Cogl.Color instead of Clutter.Color
  - Add 47 to supported shell versions
  - Drop debug log


author: Rémi Verschelde <akien@fedoraproject.org> - 4.2.1-1
changelog:
  - Version 4.2.1-stable
  - OIDN no longer bundled, recommend system package for the oidnDenoise binary


author: Rémi Verschelde <akien@fedoraproject.org> - 4.3-1
changelog:
  - Version 4.3-stable
  - Adds Wayland support (opt-in)
  - Use system embree4 and openxr on all supported Fedora versions


author: Pavol Žáčik <pzacik@redhat.com> - 0.6.5-3
changelog:
  - Patch bugs found by static analysis tools
  - Add %{name}-fix-handle-leaks-in-rdmsr-c.patch
  - Add %{name}-fix-cpuid_get_hypervisor.patch
  - Add %{name}-prevent-intel_fn11-array-overruns.patch


author: Richard W.M. Jones <rjones@redhat.com> - 1:1.52.0-5
changelog:
  - Use curl instead of wget, since wget2 is broken
    (https://gitlab.com/gnuwget/wget2/-/issues/652)
  - Remove yajl daemon dep and replace with jansson.


author: Simone Caronni <negativo17@gmail.com> - 0.15.0-6
changelog:
  - Leave autodetection of hardware extensions as per developer's comment at
    https://bugzilla.redhat.com/show_bug.cgi?id=2307795#c16


author: Mattias Ellert <mattias.ellert@physics.uu.se> - 5.0.1-1
changelog:
  - Update to version 5.0.1
  - Drop patch oidc-agent-webkit.patch (previously backported
  - Drop patch oidc-agent.patch (accepted upstram)


author: Packit <hello@packit.dev> - 115-1
changelog:
  Changes with 115
  ----------------
    * Main bump checkout action to v4 (#1713)
      * Author: Brian C. Lane, Reviewers: Achilleas Koutsou, Simon de Vlieger
    * Stage: Schema migration to separated JSON files (#1697)
      * Author: Paweł Poławski, Reviewers: Brian C. Lane, Simon de Vlieger
    * Tests: Add unit tests for org.osbuild.mkfs.btrfs stage (#1681)
      * Author: Paweł Poławski, Reviewers: Michael Vogt, Simon de Vlieger
    * Tests: Add unit tests for org.osbuild.mkfs.xfs stage (#1678)
      * Author: Paweł Poławski, Reviewers: Michael Vogt, Simon de Vlieger
    * Update snapshots to 20240327 (#1690)
      * Author: SchutzBot, Reviewers: Achilleas Koutsou, Ondřej Budai
    * inputs,sources: add new `{inputs,sources}_service` fixtures (#1685)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Ondřej Budai
    * osbuild-mpp: Expand information in PkgInfo (#1688)
      * Author: Pierre-Yves Chibon, Reviewers: Paweł Poławski, Simon de Vlieger
    * source: add curl test in preparation for #1573 (#1703)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * sources(curl): set HTTP proxy through the environment (#1708)
      * Author: Sanne Raymaekers, Reviewers: Achilleas Koutsou, Michael Vogt, Paweł Poławski
    * sources(curl): tweak tests to use monkeypatch.setenv() (#1709)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Ondřej Budai
    * sources: add regression test for issue#1693 (#1699)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * sources: some small tweaks to the curl tests (#1700)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * stages(mkdir): allow to pass in devices/mounts (#1712)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Ondřej Budai
    * stages: add org.osbuild.zip (#1692)
      * Author: Luke Yang, Reviewers: Achilleas Koutsou, Michael Vogt
    * stages: move users/selinux to v2 and add devices/mounts support (#1705)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * systemd.unit.create: Add Environment and EnvironmentFile options (HMS-3814) (#1684)
      * Author: Achilleas Koutsou, Reviewers: Michael Vogt, Simon de Vlieger
    * testutil: add AtomicCounter() as a threadsafe counter (#1707)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Ondřej Budai

  — Somewhere on the Internet, 2024-04-10


author: Packit <hello@packit.dev> - 116-1
changelog:
  Changes with 116
  ----------------
    * curl: test that OSBUILD_SOURCES_CURL_PROXY works correctly (#1710)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Paweł Poławski
    * mounts: implement new `org.osbuild.bind` mount (#1711)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Ondřej Budai
    * osbuild-depsolve-dnf(5): support proxy (#1715)
      * Author: Sanne Raymaekers, Reviewers: Paweł Poławski, Tomáš Hozza
    * osbuild-depsolve-dnf: support loading repositories from a root dir (#1674)
      * Author: Achilleas Koutsou, Reviewers: Nobody
    * osbuild: fix newline issue with final output 👀  (#1723)
      * Author: Gianluca Zuccarelli, Reviewers: Michael Vogt, Paweł Poławski, Simon de Vlieger, Tomáš Hozza
    * test: tiny tweaks for the output handling in the test_depsolve.py  (#1718)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Paweł Poławski
    * tools/osbuild-depsolve-dnf(5): require releasever (#1724)
      * Author: Achilleas Koutsou, Reviewers: Michael Vogt, Paweł Poławski
    * tools: extract make_dnf_scafolding() from config_combos() (#1717)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Sanne Raymaekers
    * tools: fix proxy key error when "proxy" is not set (#1722)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Sanne Raymaekers
    * tools: rename "nothing" to "pkg-with-no-deps" to make it a bit clearer (#1719)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski

  — Somewhere on the Internet, 2024-04-15


author: Packit <hello@packit.dev> - 117-1
changelog:
  Changes with 117
  ----------------
    * Enable osbuild-depsolve-dnf5 testing and fix a bug (#1744)
      * Author: Brian C. Lane, Reviewers: Achilleas Koutsou, Simon de Vlieger
    * Enable unit tests for osbuild-depsolve-dnf(5) (#1731)
      * Author: Achilleas Koutsou, Reviewers: Michael Vogt, Sanne Raymaekers
    * Makefile: make sure that `make test-all` really runs all tests (#1734)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * Stages/SELinux: force auto-relabel of full contexts (#1737)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Michael Vogt, Simon de Vlieger
    * Stages/cloud-init: support additional datasources (COMPOSER-2060) (#1729)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Michael Vogt
    * Update snapshots to 20240415 (#1725)
      * Author: SchutzBot, Reviewers: Sanne Raymaekers, Simon de Vlieger
    * meta: automatically allow `devices` as input in the stages schemas (#1727)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Simon de Vlieger
    * org.osbuld.systemd: support unit files that start with - (#1749)
      * Author: Achilleas Koutsou, Reviewers: Alexander Larsson, Brian C. Lane, Gianluca Zuccarelli
    * stages(groups): add support for the mounts for `bootc install to-filesystem`  (#1726)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Ondřej Budai
    * stages: add support for `--target-imgref` to bootc install to-filesystem (#1740)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Ondřej Budai
    * stages: allow `bootloader --append` via kickstart (#1742)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * systemd.unit.create: support the After option in the Unit section (HMS-3814) (#1741)
      * Author: Achilleas Koutsou, Reviewers: Michael Vogt, Sanne Raymaekers
    * tools: extract common _test_depsolve_both_dnf_dnf5 helper. (#1716)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * tools: fix error when `releasever` cannot be found (#1739)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * tox,workflow: run all tests in the GH worfklow (#1735)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Ondřej Budai

  — Somewhere on the Internet, 2024-04-24


author: Packit <hello@packit.dev> - 118-1
changelog:
  Changes with 118
  ----------------
    * Fix bug with sslverify and add test (#1758)
      * Author: Brian C. Lane, Reviewers: Achilleas Koutsou, Michael Vogt
    * Revert "Disable F40 CI (CVE-2024-3094 response)" (#1762)
      * Author: Brian C. Lane, Reviewers: Achilleas Koutsou, Michael Vogt, Tomáš Hozza
    * Start building RPMs on 9.5 nightly (#1770)
      * Author: Alexander Todorov, Reviewers: Jakub Rusz, Tomáš Hozza
    * Update snapshots to 20240502 (#1771)
      * Author: SchutzBot, Reviewers: Achilleas Koutsou, Tomáš Hozza
    * osbuild: fix error match in mount test for rawhide (#1754)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Tomáš Hozza
    * sources/curl: Use our own User-Agent (#1766)
      * Author: Ondřej Budai, Reviewers: Achilleas Koutsou, Gianluca Zuccarelli, Michael Vogt, Simon de Vlieger
    * spec: Install osbuild-depsolve-dnf not dnf5 (#1769)
      * Author: Brian C. Lane, Reviewers: Michael Vogt, Simon de Vlieger
    * stages/kickstart: add support for the dir transport (#1764)
      * Author: Ondřej Budai, Reviewers: Michael Vogt, Tomáš Hozza
    * stages/skopeo:  Fix the remove-signatures option (#1763)
      * Author: Ondřej Budai, Reviewers: Achilleas Koutsou, Florian Schüller, Gianluca Zuccarelli, Michael Vogt
    * stages: add support for destination {dir,oci-archive} to the skopeo stage (#1752)
      * Author: Florian Schüller, Reviewers: Achilleas Koutsou, Michael Vogt
    * stages: new bootc.install.config stage (#1747)
      * Author: Achilleas Koutsou, Reviewers: Michael Vogt, Ondřej Budai
    * stages: remove redundant entries of devices/mounts in schemas (#1733)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Tomáš Hozza
    * stages: tweak the skopeo copy test (#1761)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Brian C. Lane, Florian Schüller
    * test_clamp_mtime: avoid clashing with chrony (#1760)
      * Author: Florian Schüller, Reviewers: Brian C. Lane, Michael Vogt
    * testutil: fix `make_container()` cleanup (#1757)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Brian C. Lane
    * workflow: bump osbuild-ci container to include podman, et al. (#1759)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Ondřej Budai
    * workflow: show summary why tests are skipped (#1755)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Brian C. Lane

  — Somewhere on the Internet, 2024-05-08


author: Packit <hello@packit.dev> - 119-1
changelog:
  Changes with 119
  ----------------
    * Add user force password reset (#1778)
      * Author: andremarianiello, Reviewers: Brian C. Lane, Paweł Poławski
    * Tests: Add unit tests for org.osbuild.mkfs.fat stage (#1677)
      * Author: Paweł Poławski, Reviewers: Brian C. Lane, Michael Vogt
    * Update snapshots to 20240514 (#1784)
      * Author: SchutzBot, Reviewers: Achilleas Koutsou, Brian C. Lane
    * runners: revert "runners: clean up temp files before exiting the runner" (#1788)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Tomáš Hozza
    * stage/systemd.unit.create: add Before option (#1782)
      * Author: Achilleas Koutsou, Reviewers: Brian C. Lane, Michael Vogt
    * stages/systemd.unit.create: update schema to support [Mount] (#1748)
      * Author: Achilleas Koutsou, Reviewers: Gianluca Zuccarelli, Michael Vogt
    * test/buildroot: fix checking /var/tmp mode (#1787)
      * Author: Tomáš Hozza, Reviewers: Michael Vogt, Ondřej Budai
    * tests: update stage tests readme (#1738)
      * Author: Paweł Poławski, Reviewers: Michael Vogt, Ondřej Budai, Tomáš Hozza

  — Somewhere on the Internet, 2024-05-22


author: Packit <hello@packit.dev> - 122-1
changelog:
  Changes with 122
  ----------------
    * CI: Add testing based on Centos containers (COMPOSER-2125) (#1585)
      * Author: Paweł Poławski, Reviewers: Achilleas Koutsou, Tomáš Hozza
    * Test/assemblers: update manifest to use Fedora 40 + update manifests testing (#1808)
      * Author: Tomáš Hozza, Reviewers: Alexander Todorov, Michael Vogt
    * Update snapshots for rhel-9.5 to make them in sync with osbuild-composer (#1807)
      * Author: Alexander Todorov, Reviewers: Sanne Raymaekers, Tomáš Hozza
    * sources/curl: use `--user-agent` option to set the user-agent (#1809)
      * Author: Sanne Raymaekers, Reviewers: Michael Vogt, Simon de Vlieger

  — Somewhere on the Internet, 2024-07-03


author: Packit <hello@packit.dev> - 123-1
changelog:
  Changes with 123
  ----------------
    * Start building RPMs on CentOS Stream 10 for testing (#1799)
      * Author: Alexander Todorov, Reviewers: Florian Schüller, Tomáš Hozza
    * Tests: force checkout manifest-db (#1820)
      * Author: Tomáš Hozza, Reviewers: Florian Schüller, Gianluca Zuccarelli
    * sources(curl): disable `curl --parallel` by default (#1811)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Simon de Vlieger, Tomáš Hozza
    * sources(curl): download multiple URLs with the same curl command (#1573)
      * Author: Michael Vogt, Reviewers: Ondřej Budai, Simon de Vlieger
    * stages/oscap.remediation: small import adjustment (#1814)
      * Author: Gianluca Zuccarelli, Reviewers: Achilleas Koutsou, Michael Vogt
    * stages: add stage for creating dm-verity partitions (#1806)
      * Author: Nikita Dubrovski, Reviewers: Achilleas Koutsou, Michael Vogt, Paweł Poławski

  — Somewhere on the Internet, 2024-07-17


author: Packit <hello@packit.dev> - 124-1
changelog:
  Changes with 124
  ----------------
    * CI: build RPMs for RHEL-10.0-nightly (COMPOSER-2161) (#1822)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Florian Schüller
    * Fix dnf4 mark stage test (#1825)
      * Author: Tomáš Hozza, Reviewers: Michael Vogt, Simon de Vlieger
    * Make `tailored_profile_id` required for `json` autotailoring (#1794)
      * Author: Gianluca Zuccarelli, Reviewers: Achilleas Koutsou, Sanne Raymaekers
    * Test/manifests: start testing on c10s and el10.0-nightly (COMPOSER-2161) (#1821)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Alexander Todorov
    * Test: fix dnf4.mark stage test with DNF5 (#1824)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Gianluca Zuccarelli
    * mpp: Allow container-storage image resolution (#1792)
      * Author: Roberto Majadas, Reviewers: Achilleas Koutsou, Ondřej Budai
    * sources(curl): error if curl exists 0 but there are downloads left (#1816)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * sources(curl): use json like output inside of custom record (#1817)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * stages/autotailor: fix stage schema (#1823)
      * Author: Gianluca Zuccarelli, Reviewers: Sanne Raymaekers, Tomáš Hozza
    * test: add new `https_serve_directory()` and test certs (#1815)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski

  — Somewhere on the Internet, 2024-07-31


author: Packit <hello@packit.dev> - 125-1
changelog:
  Changes with 125
  ----------------
    * Makefile: run `tox parallel` without the spinner (#1835)
      * Author: Michael Vogt, Reviewers: Ondřej Budai, Tomáš Hozza
    * Test/dnf4.mark: adjust the test for markings used by DNF5 (#1827)
      * Author: Tomáš Hozza, Reviewers: Michael Vogt, Paweł Poławski
    * Tests: Add unit tests for org.osbuild.gunzip stage (#1689)
      * Author: Paweł Poławski, Reviewers: Brian C. Lane, Michael Vogt
    * jsoncom: gracefully report EMSGSIZE errors (#1840)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * main,monitor: fix total steps in progress reporting (#1826)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Paweł Poławski
    * osbuild-depsolve-dnf: fix some bugs and extend test coverage (#1834)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Gianluca Zuccarelli
    * osbuild-depsolve-dnf: refactor into osbuild.solver module (#1776)
      * Author: Brian C. Lane, Reviewers: Michael Vogt, Simon de Vlieger
    * osbuild: make `inputs` `map()` function use fd for reply as well (#1836)
      * Author: Michael Vogt, Reviewers: Achilleas Koutsou, Simon de Vlieger
    * solver: include "solver" key in the dnfjson reply (#1829)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Paweł Poławski
    * test_dnf4_mark(): disable all plugins when inspecting markings (#1837)
      * Author: Tomáš Hozza, Reviewers: Gianluca Zuccarelli, Paweł Poławski

  — Somewhere on the Internet, 2024-08-14


author: Packit <hello@packit.dev> - 126-1
changelog:
  Changes with 126
  ----------------
    * CI: update terraform hash (#1859)
      * Author: Achilleas Koutsou, Reviewers: Florian Schüller, Michael Vogt, Ondřej Budai, Sanne Raymaekers, Tomáš Hozza
    * New utility module: chroot (#1860)
      * Author: Achilleas Koutsou, Reviewers: Michael Vogt, Tomáš Hozza
    * Stages/`org.osbuild.dracut`: fix runtime environment for dracut (COMPOSER-2193) (#1846)
      * Author: Tomáš Hozza, Reviewers: Achilleas Koutsou, Michael Vogt
    * Update snapshots to 20240819 (#1856)
      * Author: SchutzBot, Reviewers: Achilleas Koutsou, Michael Vogt
    * osbuild: add "Conflicts"/"Provides" to avoid breaking composer (#1849)
      * Author: Michael Vogt, Reviewers: Brian C. Lane, Tomáš Hozza
    * schutzbot: add Achilleas' SSH keys (#1858)
      * Author: Achilleas Koutsou, Reviewers: Tomáš Hozza
    * test/depsolve: use strings for pytest.skip() (#1852)
      * Author: Achilleas Koutsou, Reviewers: Brian C. Lane, Michael Vogt, Paweł Poławski

  — Somewhere on the Internet, 2024-08-21


author: Packit <hello@packit.dev> - 0.97.1-1
changelog:
  - We have fixed the behaviour for `dist-git init` command when `upstream-git-url` argument is specified.
  - Resolves: rhbz#2278839


author: Packit <hello@packit.dev> - 0.97.3-1
changelog:
  - We have fixed a bug that caused inconsistency between the promised environment variables (from the docs) and the environment that has been actually provided. Now you should have access to `PACKIT_UPSTREAM_REPO` and `PACKIT_DOWNSTREAM_REPO`, if they have been cloned already, in the `post-upstream-clone` action. (#2327)
  - Resolves: rhbz#2293661


author: Packit <hello@packit.dev> - 0.98.0-1
changelog:
  - Packit now updates its own, not yet merged, pull requests instead of creating new ones for new releases. (#2204)
  - Resolves: rhbz#2295821


author: Packit <hello@packit.dev> - 0.100.0-1
changelog:
  - `packit pull-from-upstream` now allows omitting `upstream_project_url` in the configuration in which case the interaction with the upstream repository is skipped during release syncing. (#2354)
  - We have implemented a CLI support for Koji builds against CBS Koji instance. (#2267)


author: Packit <hello@packit.dev> - 0.100.3-1
changelog:
  - `dist-git init` command now allows `upstream-git-url` not to be specified. (#2387)
  - Resolves: rhbz#2306481


author: Packit <hello@packit.dev> - 0.101.0-1
changelog:
  - Packit now supports passing custom arguments to various static analyzers through `--csmock-args` CLI option and `csmock_args` configuration. (#2402)
  - When synching a new release Packit is now able to fast forward a specified merge to a configured list of branches.
    Use the `dist_git_branches` new syntax as in this example:
    `{"rawhide": {"fast_forward_merge_into": ["f40"]}, "fedora-stable": {}}` (#2363)
  - Resolves: rhbz#2310376


author: Artur Frenszek-Iwicki <fedora@svgames.pl> - 1.2.0-2
changelog:
  - Add missing dependencies (as reported by phpcompatinfo)
  - Make package directory hierarchy PSR-0 compatible
  - Make test suite optional


author: Lubomír Sedlář <lsedlar@redhat.com> - 4.6.1-1
changelog:
  - Make python3-mock dependency optional (lsedlar)
  - Make latest black happy (lsedlar)
  - Update tox configuration (lsedlar)
  - Fix scm tests to not use user configuration (lsedlar)
  - Add workaround for old requests in kojiwrapper (lsedlar)
  - Use pungi_buildinstall without NFS (lsedlar)
  - checks: don't require "repo" in the "ostree" schema (awilliam)
  - ostree_container: Use unique temporary directory (lsedlar)


author: Lubomír Sedlář <lsedlar@redhat.com> - 4.6.2-1
changelog:
  - Phases/osbuild: support passing 'customizations' for image builds (thozza)
  - dnf: Load filelists for actual solver too (lsedlar)
  - kiwibuild: Tell Koji which arches are allowed to fail (lsedlar)
  - kiwibuild: Update documentation with more details (lsedlar)
  - kiwibuild: Add kiwibuild global options (lsedlar)
  - kiwibuild: Process images same as image-build (lsedlar)
  - kiwibuild: Add subvariant configuration (lsedlar)
  - kiwibuild: Work around missing arch in build data (lsedlar)
  - Support KiwiBuild (hlin)
  - ostree/container: Set version in treefile 'automatic-version-prefix' (tim)
  - dnf: Explicitly load filelists (lsedlar)
  - Fix buildinstall reuse with pungi_buildinstall plugin (lsedlar)
  - Fix filters for DNF query (lsedlar)
  - gather-dnf: Support dotarch in filter_packages (lsedlar)
  - gather: Support dotarch notation for debuginfo packages (lsedlar)
  - Correctly set input and fultree_exclude flags for debuginfo (lsedlar)


author: Haibo Lin <hlin@redhat.com> - 4.6.3-1
changelog:
  - Fix formatting of long line (lsedlar)
  - unified-isos: Resolve symlinks (lsedlar)
  - gather: Skip lookaside packages from local lookaside repo (lsedlar)
  - pkgset: Avoid adding modules to unavailable arches (hlin)
  - iso: Extract volume id with xorriso if available (lsedlar)
  - De-duplicate log messages for ostree and ostree_container phases (awilliam)
  - Handle tracebacks as str or bytes (lsedlar)
  - ostree/container: add missing --version arg (awilliam)
  - Block pkgset reuse on module defaults change (lsedlar)
  - Include task ID in DONE message for OSBS phase (awilliam)
  - Various phases: consistent format of failure message (awilliam)
  - Update tests to exercise kiwi specific metadata (lsedlar)
  - Kiwi: translate virtualbox and azure productmd formats (awilliam)
  - kiwibuild: Add tests for the basic functionality (lsedlar)
  - kiwibuild: Remove repos as dicts (lsedlar)
  - Fix additional image metadata (lsedlar)
  - Drop kiwibuild_version option (lsedlar)
  - Update docs with kiwibuild options (lsedlar)
  - kiwibuild: allow setting description scm and path at phase level (awilliam)
  - Use latest Fedora for python 3 test environment (lsedlar)
  - Install unittest2 only on python 2 (lsedlar)
  - Fix 'failable' handling for kiwibuild phase (awilliam)
  - image_build: Accept Kiwi extension for Azure VHD images (jeremycline)
  - image_build: accept Kiwi vagrant image name format (awilliam)


author: Lubomír Sedlář <lsedlar@redhat.com> - 4.7.0-1
changelog:
  - kiwibuild: Add support for type, type attr and bundle format (lsedlar)
  - createiso: Block reuse if unsigned packages are allowed (lsedlar)
  - Allow live_images phase to still be skipped (lsedlar)
  - createiso: Recompute .treeinfo checksums for images (lsedlar)
  - Drop support for signing rpm-wrapped artifacts (lsedlar)
  - Remove live_images.py (LiveImagesPhase) (awilliam)
  - Clean up requirements (lsedlar)
  - Update pungi.spec for py3 (hlin)


author: Benjamin A. Beasley <code@musicinmybrain.net> - 0.4.2-1
changelog:
  - Update to 0.4.2 (close RHBZ#2301764)
  - After F40, do not package tests as documentation – this doesn’t seem
    useful


author: Miro Hrončok <mhroncok@redhat.com> - 3.12.2-3
changelog:
  - Move all test modules to the python3-test package, namely:
     - __phello__
     - _xxsubinterpreters
     - xxlimited
     - xxlimited_35
     - xxsubtype


author: Peter Bieringer <pb@bieringer.de> - 3.1.8-53
changelog:
  - Update patch release/upstream to d7ce2f0b (2023-04-22)
  - Add radicale-3.1.8-fix-main-component-PR-1252.patch
  - Remove cases for radicale major version 1 and 2
  - Partially align spec file with EPEL variant
  - Move binaries to libexec and create a wrapper script
  - Align systemd unit file and SELinux definition with EPEL variant


author: Peter Bieringer <pb@bieringer.de> - 3.2.2-1
changelog:
  - Update to 3.2.2
  - Obsolete radicale-config-storage-hooks-SELinux-note.patch by inject inside spec file
  - Obsolete radicale-httpd by contrib config from upstream


author: Benjamin A. Beasley <code@musicinmybrain.net> - 1.3.3-11
changelog:
  - Assert that the .dist-info directory contains a license file
  - Do not package a duplicate license file


author: Benjamin A. Beasley <code@musicinmybrain.net> - 1.4.0-1
changelog:
  - Update to 1.4.0 (close RHBZ#2308262)
  - Re-enable the server_test, which now works properly offline


author: Nils Philippsen <nils@redhat.com> - 0.7.0-1
changelog:
  - Update to 0.7.0
  - Split off man pages for sub-commands
  - Ship scriptlets needed for shell completion


author: Benjamin A. Beasley <code@musicinmybrain.net> - 0.3.3-2
changelog:
  - Reduce debuginfo level to “limited”
  - Fixes failures due to memory exhaustion on builders, particularly in F41


author: Dmitry Butskoy <Dmitry@Butskoy.name> 2.53.17-1
changelog:
  - update to 2.53.17
  - enable webcomponents and pointer-events (upcoming upstream changes)
  - send origin header (for same-origin only) to satisfy client checking sites
  - backport fixes for mozbz 1502801 and mozbz 1502802
  - fix mozbz 1406821 to avoid extra debug output
  - add support for ffmpeg-6.0
  - no more needed python2.7 for build
  - drop obsoleted gconf2 support


author: Martin Gansser <martinkg@fedoraproject.org> - 24.06.02-2
changelog:
  - Move libCuteLogger.so out of linker search path
  - Changed RR ffmpeg to RR /usr/bin/ffmpeg
  - Use macro %{org_name_shotcut}
  - Licensing update
  - hardlink duplicate files


author: Martin Gansser <martinkg@fedoraproject.org> - 24.06.02-3
changelog:
  - License update
  - Drope unused patch
  - Remove duplicate files and create hardlinks
  - Add RUNPATH pointing to %{_libdir}/shotcut


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.61.2
   - Fix to enable plug/slot sanitization for prepare-image
   - Fix panic when device-service.access=offline
   - Support offline remodeling
   - Allow offline update only remodels without serial
   - Fail early when remodeling to old model revision
   - Fix to enable plug/slot sanitization for validate-seed
   - Allow removal of core snap on classic systems
   - Fix network-control interface denial for file lock on /run/netns
   - Add well-known core24 snap-id
   - Fix remodel snap installation order
   - Prevent remodeling from UC18+ to UC16
   - Fix cups auto-connect on classic with cups snap installed
   - u2f-devices interface support for GoTrust Idem Key with USB-C
   - Fix to restore services after unlink failure
   - Add libcudnn.so to Nvidia libraries
   - Fix skipping base snap download due to false snapd downgrade
     conflict


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.62
   - Aspects based configuration schema support (experimental)
   - Refresh app awareness support for UI (experimental)
   - Support for user daemons by introducing new control switches
     --user/--system/--users for service start/stop/restart
     (experimental)
   - Add AppArmor prompting experimental flag (feature currently
     unsupported)
   - Installation of local snap components of type test
   - Packaging of components with snap pack
   - Expose experimental features supported/enabled in snapd REST API
     endpoint /v2/system-info
   - Support creating and removing recovery systems for use by factory
     reset
   - Enable API route for creating and removing recovery systems using
     /v2/systems with action create and /v2/systems/{label} with action
     remove
   - Lift requirements for fde-setup hook for single boot install
   - Enable single reboot gadget update for UC20+
   - Allow core to be removed on classic systems
   - Support for remodeling on hybrid systems
   - Install desktop files on Ubuntu Core and update after snapd
     upgrade
   - Upgrade sandbox features to account for cgroup v2 device filtering
   - Support snaps to manage their own cgroups
   - Add support for AppArmor 4.0 unconfined profile mode
   - Add AppArmor based read access to /etc/default/keyboard
   - Upgrade to squashfuse 0.5.0
   - Support useradd utility to enable removing Perl dependency for
     UC24+
   - Support for recovery-chooser to use console-conf snap
   - Add support for --uid/--gid using strace-static
   - Add support for notices (from pebble) and expose via the snapd
     REST API endpoints /v2/notices and /v2/notice
   - Add polkit authentication for snapd REST API endpoints
     /v2/snaps/{snap}/conf and /v2/apps
   - Add refresh-inhibit field to snapd REST API endpoint /v2/snaps
   - Add refresh-inhibited select query to REST API endpoint /v2/snaps
   - Take into account validation sets during remodeling
   - Improve offline remodeling to use installed revisions of snaps to
     fulfill the remodel revision requirement
   - Add rpi configuration option sdtv_mode
   - When snapd snap is not installed, pin policy ABI to 4.0 or 3.0 if
     present on host
   - Fix gadget zero-sized disk mapping caused by not ignoring zero
     sized storage traits
   - Fix gadget install case where size of existing partition was not
     correctly taken into account
   - Fix trying to unmount early kernel mount if it does not exist
   - Fix restarting mount units on snapd start
   - Fix call to udev in preseed mode
   - Fix to ensure always setting up the device cgroup for base bare
     and core24+
   - Fix not copying data from newly set homedirs on revision change
   - Fix leaving behind empty snap home directories after snap is
     removed (resulting in broken symlink)
   - Fix to avoid using libzstd from host by adding to snapd snap
   - Fix autorefresh to correctly handle forever refresh hold
   - Fix username regex allowed for system-user assertion to not allow
     '+'
   - Fix incorrect application icon for notification after autorefresh
     completion
   - Fix to restart mount units when changed
   - Fix to support AppArmor running under incus
   - Fix case of snap-update-ns dropping synthetic mounts due to
     failure to match  desired mount dependencies
   - Fix parsing of base snap version to enable pre-seeding of Ubuntu
     Core Desktop
   - Fix packaging and tests for various distributions
   - Add remoteproc interface to allow developers to interact with
     Remote Processor Framework which enables snaps to load firmware to
     ARM Cortex microcontrollers
   - Add kernel-control interface to enable controlling the kernel
     firmware search path
   - Add nfs-mount interface to allow mounting of NFS shares
   - Add ros-opt-data interface to allow snaps to access the host
     /opt/ros/ paths
   - Add snap-refresh-observe interface that provides refresh-app-
     awareness clients access to relevant snapd API endpoints
   - steam-support interface: generalize Pressure Vessel root paths and
     allow access to driver information, features and container
     versions
   - steam-support interface: make implicit on Ubuntu Core Desktop
   - desktop interface: improved support for Ubuntu Core Desktop and
     limit autoconnection to implicit slots
   - cups-control interface: make autoconnect depend on presence of
     cupsd on host to ensure it works on classic systems
   - opengl interface: allow read access to /usr/share/nvidia
   - personal-files interface: extend to support automatic creation of
     missing parent directories in write paths
   - network-control interface: allow creating /run/resolveconf
   - network-setup-control and network-setup-observe interfaces: allow
     busctl bind as required for systemd 254+
   - libvirt interface: allow r/w access to /run/libvirt/libvirt-sock-
     ro and read access to /var/lib/libvirt/dnsmasq/**
   - fwupd interface: allow access to IMPI devices (including locking
     of device nodes), sysfs attributes needed by amdgpu and the COD
     capsule update directory
   - uio interface: allow configuring UIO drivers from userspace
     libraries
   - serial-port interface: add support for NXP Layerscape SoC
   - lxd-support interface: add attribute enable-unconfined-mode to
     require LXD to opt-in to run unconfined
   - block-devices interface: add support for ZFS volumes
   - system-packages-doc interface: add support for reading jquery and
     sphinx documentation
   - system-packages-doc interface: workaround to prevent autoconnect
     failure for snaps using base bare
   - microceph-support interface: allow more types of block devices to
     be added as an OSD
   - mount-observe interface: allow read access to
     /proc/{pid}/task/{tid}/mounts and proc/{pid}/task/{tid}/mountinfo
   - polkit interface: changed to not be implicit on core because
     installing policy files is not possible
   - upower-observe interface: allow stats refresh
   - gpg-public-keys interface: allow creating lock file for certain
     gpg operations
   - shutdown interface: allow access to SetRebootParameter method
   - media-control interface: allow device file locking
   - u2f-devices interface: support for Trustkey G310H, JaCarta U2F,
     Kensington VeriMark Guard, RSA DS100, Google Titan v2


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.63
   - Support for snap services to show the current status of user
     services (experimental)
   - Refresh app awareness: record snap-run-inhibit notice when
     starting app from snap that is busy with refresh (experimental)
   - Refresh app awareness: use warnings as fallback for desktop
     notifications (experimental)
   - Aspect based configuration: make request fields in the aspect-
     bundle's rules optional (experimental)
   - Aspect based configuration: make map keys conform to the same
     format as path sub-keys (experimental)
   - Aspect based configuration: make unset and set behaviour similar
     to configuration options (experimental)
   - Aspect based configuration: limit nesting level for setting value
     (experimental)
   - Components: use symlinks to point active snap component revisions
   - Components: add model assertion support for components
   - Components: fix to ensure local component installation always gets
     a new revision number
   - Add basic support for a CIFS remote filesystem-based home
     directory
   - Add support for AppArmor profile kill mode to avoid snap-confine
     error
   - Allow more than one interface to grant access to the same API
     endpoint or notice type
   - Allow all snapd service's control group processes to send systemd
     notifications to prevent warnings flooding the log
   - Enable not preseeded single boot install
   - Update secboot to handle new sbatlevel
   - Fix to not use cgroup for non-strict confined snaps (devmode,
     classic)
   - Fix two race conditions relating to freedesktop notifications
   - Fix missing tunables in snap-update-ns AppArmor template
   - Fix rejection of snapd snap udev command line by older host snap-
     device-helper
   - Rework seccomp allow/deny list
   - Clean up files removed by gadgets
   - Remove non-viable boot chains to avoid secboot failure
   - posix_mq interface: add support for missing time64 mqueue syscalls
     mq_timedreceive_time64 and mq_timedsend_time64
   - password-manager-service interface: allow kwalletd version 6
   - kubernetes-support interface: allow SOCK_SEQPACKET sockets
   - system-observe interface: allow listing systemd units and their
     properties
   - opengl interface: enable use of nvidia container toolkit CDI
     config generation


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.64
   - Support building snapd using base Core22 (Snapcraft 8.x)
   - FIPS: support building FIPS complaint snapd variant that switches
     to FIPS mode when the system boots with FIPS enabled
   - AppArmor: update to AppArmor 4.0.1
   - AppArmor: support AppArmor snippet priorities
   - AppArmor prompting: add checks for prompting support, include
     prompting status in system key, and restart snapd if prompting
     flag changes
   - AppArmor prompting: include prompt prefix in AppArmor rules if
     prompting is supported and enabled
   - AppArmor prompting: add common types, constraints, and mappings
     from AppArmor permissions to abstract permissions
   - AppArmor prompting: add path pattern parsing and matching
   - Registry views (experimental): rename from aspects to registries
   - Registry views (experimental): support reading registry views
     using snapctl
   - Registry views (experimental): restrict view paths from using a
     number as first character and view names to storage path style
     patterns
   - Snap components: support installing snaps and components from
     files at the same time (no REST API/CLI)
   - Snap components: support downloading components related assertions
     from the store
   - Snap components: support installing components from the store (no
     REST API/CLI)
   - Snap components: support removing components (REST API, no CLI)
   - Snap components: started support for component hooks
   - Snap components: support kernel modules as components
   - Refresh app awareness (experimental): add data field for
     /v2/changes REST API to allow associating each task with affected
     snaps
   - Refresh app awareness (experimental): use the app name from
     .desktop file in notifications
   - Refresh app awareness (experimental): give snap-refresh-observe
     interface access to /v2/snaps/{name} endpoint
   - Allow re-exec when SNAP_REEXEC is set for unlisted distros to
     simplify testing
   - Generate GNU build ID for Go binaries
   - Add missing etelpmoc.sh for shell completion
   - Do not attempt to run snapd on classic when re-exec is disabled
   - Packaging/build maintenance for Debian sid, Fedora, Arch, openSuse
   - Add snap debug api command to enable running raw queries
   - Enable snap-confine snap mount directory detection
   - Replace global seccomp filter with deny rules in standard seccomp
     template
   - Remove support for Ubuntu Core Launcher (superseded by snap-
     confine)
   - Support creating pending serial bound users after serial assertion
     becomes available
   - Support disabling cloud-init using kernel command-line
   - In hybrid systems, apps can refresh without waiting for restarts
     required by essential snaps
   - Ship snap-debug-info.sh script used for system diagnostics
   - Improve error messages when attempting to run non-existent snap
   - Switch to -u UID:GID for strace-static
   - Support enabling snapd logging with snap set system
     debug.snapd.{log,log-level}
   - Fix restarting activated services instead of their activator units
     (i.e. sockets, timers)
   - Fix potential unexpected auto-refresh of snap on managed schedule
   - Fix potential segfault by guarding against kernel command-line
     changes on classic system
   - Fix proxy entries in /etc/environment with missing newline that
     caused later manual entries to not be usable
   - Fix offline remodelling by ignoring prerequisites that will
     otherwise be downloaded from store
   - Fix devmode seccomp deny regression that caused spamming the log
     instead of actual denies
   - Fix snap lock leak during refresh
   - Fix not re-pinning validation sets that were already pinned when
     enforcing new validation sets
   - Fix handling of unexpected snapd runtime failure
   - Fix /v2/notices REST API skipping notices with duplicate
     timestamps
   - Fix comparing systemd versions that may contain pre-release
     suffixes
   - Fix udev potentially starting before snap-device-helper is made
     available
   - Fix race in snap seed metadata loading
   - Fix treating cloud-init exit status 2 as error
   - Fix to prevent sending refresh complete notification if snap snap-
     refresh-observe interface is connected
   - Fix to queue snapctl service commands if run from the default-
     configure hook to ensure they get up-to-date config values
   - Fix stop service failure when the service is not actually running
     anymore
   - Add registry interface that provides snaps access to a particular
     registry view
   - steam-support interface: relaxed AppArmor and seccomp restrictions
     to improve user experience
   - home interface: autoconnect home on Ubuntu Core Desktop
   - serial-port interface: support RPMsg tty
   - display-control interface: allow changing LVDS backlight power and
     brightness
   - power-control interface: support for battery charging thesholds,
     type/status and AC type/status
   - cpu-control interface: allow CPU C-state control
   - raw-usb interface: support RPi5 and Thinkpad x13s
   - custom-device interface: allow device file locking
   - lxd-support interface: allow LXD to self-manage its own cgroup
   - network-manager interface: support MPTCP sockets
   - network-control interface: allow plug/slot access to gnutls config
     and systemd resolved cache flushing via D-Bus


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.65
   - Support building snapd using base Core22 (Snapcraft 8.x)
   - FIPS: support building FIPS complaint snapd variant that switches
     to FIPS mode when the system boots with FIPS enabled
   - AppArmor: update to latest 4.0.2 release
   - AppArmor: enable using ABI 4.0 from host parser
   - AppArmor: fix parser lookup
   - AppArmor: support AppArmor snippet priorities
   - AppArmor: allow reading cgroup memory.max file
   - AppArmor: allow using snap-exec coming from the snapd snap when
     starting a confined process with jailmode
   - AppArmor prompting (experimental): add checks for prompting
     support, include prompting status in system key, and restart snapd
     if prompting flag changes
   - AppArmor prompting (experimental): include prompt prefix in
     AppArmor rules if prompting is supported and enabled
   - AppArmor prompting (experimental): add common types, constraints,
     and mappings from AppArmor permissions to abstract permissions
   - AppArmor prompting (experimental): add path pattern parsing and
     matching
   - AppArmor prompting (experimental): add path pattern precedence
     based on specificity
   - AppArmor prompting (experimental): add packages to manage
     outstanding request prompts and rules
   - AppArmor prompting (experimental): add prompting API and notice
     types, which require snap-interfaces-requests-control interface
   - AppArmor prompting (experimental): feature flag can only be
     enabled if prompting is supported, handler service connected, and
     the service can be started
   - Registry views (experimental): rename from aspects to registries
   - Registry views (experimental): support reading registry views and
     setting/unsetting registry data using snapctl
   - Registry views (experimental): fetch and refresh registry
     assertions as needed
   - Registry views (experimental): restrict view paths from using a
     number as first character and view names to storage path style
     patterns
   - Snap components: support installing snaps and components from
     files at the same time (no REST API/CLI)
   - Snap components: support downloading components related assertions
     from the store
   - Snap components: support installing components from the store
   - Snap components: support removing components individually and
     during snap removal
   - Snap components: support kernel modules as components
   - Snap components: support for component install, pre-refresh and
     post-refresh hooks
   - Snap components: initial support for building systems that contain
     components
   - Refresh app awareness (experimental): add data field for
     /v2/changes REST API to allow associating each task with affected
     snaps
   - Refresh app awareness (experimental): use the app name from
     .desktop file in notifications
   - Refresh app awareness (experimental): give snap-refresh-observe
     interface access to /v2/snaps/{name} endpoint
   - Improve snap-confine compatibility with nvidia drivers
   - Allow re-exec when SNAP_REEXEC is set for unlisted distros to
     simplify testing
   - Allow mixing revision and channel on snap install
   - Generate GNU build ID for Go binaries
   - Add missing etelpmoc.sh for shell completion
   - Do not attempt to run snapd on classic when re-exec is disabled
   - Packaging/build maintenance for Debian sid, Fedora, Arch, openSuse
   - Add snap debug API command to enable running raw queries
   - Enable snap-confine snap mount directory detection
   - Replace global seccomp filter with deny rules in standard seccomp
     template
   - Remove support for Ubuntu Core Launcher (superseded by snap-
     confine)
   - Support creating pending serial bound users after serial assertion
     becomes available
   - Support disabling cloud-init using kernel command-line
   - In hybrid systems, apps can refresh without waiting for restarts
     required by essential snaps
   - Ship snap-debug-info.sh script used for system diagnostics
   - Improve error messages when attempting to run non-existent snap
   - Switch to -u UID:GID for strace-static
   - Support enabling snapd logging with snap set system
     debug.snapd.{log,log-level}
   - Add options system.coredump.enable and system.coredump.maxuse to
     support using systemd-coredump on Ubuntu Core
   - Provide documentation URL for 'snap interface '
   - Fix restarting activated services instead of their activator units
     (i.e. sockets, timers)
   - Fix potential unexpected auto-refresh of snap on managed schedule
   - Fix potential segfault by guarding against kernel command-line
     changes on classic system
   - Fix proxy entries in /etc/environment with missing newline that
     caused later manual entries to not be usable
   - Fix offline remodelling by ignoring prerequisites that will
     otherwise be downloaded from store
   - Fix devmode seccomp deny regression that caused spamming the log
     instead of actual denies
   - Fix snap lock leak during refresh
   - Fix not re-pinning validation sets that were already pinned when
     enforcing new validation sets
   - Fix handling of unexpected snapd runtime failure
   - Fix /v2/notices REST API skipping notices with duplicate
     timestamps
   - Fix comparing systemd versions that may contain pre-release
     suffixes
   - Fix udev potentially starting before snap-device-helper is made
     available
   - Fix race in snap seed metadata loading
   - Fix treating cloud-init exit status 2 as error
   - Fix to prevent sending refresh complete notification if snap snap-
     refresh-observe interface is connected
   - Fix to queue snapctl service commands if run from the default-
     configure hook to ensure they get up-to-date config values
   - Fix stop service failure when the service is not actually running
     anymore
   - Fix parsing /proc/PID/mounts with spaces
   - Add registry interface that provides snaps access to a particular
     registry view
   - Add snap-interfaces-requests-control interface to enable prompting
     client snaps
   - steam-support interface: remove all AppArmor and seccomp
     restrictions to improve user experience
   - opengl interface: improve compatibility with nvidia drivers
   - home interface: autoconnect home on Ubuntu Core Desktop
   - serial-port interface: support RPMsg tty
   - display-control interface: allow changing LVDS backlight power and
     brightness
   - power-control interface: support for battery charging thesholds,
     type/status and AC type/status
   - cpu-control interface: allow CPU C-state control
   - raw-usb interface: support RPi5 and Thinkpad x13s
   - custom-device interface: allow device file locking
   - lxd-support interface: allow LXD to self-manage its own cgroup
   - network-manager interface: support MPTCP sockets
   - network-control interface: allow plug/slot access to gnutls config
     and systemd resolved cache flushing via D-Bus
   - network-control interface: allow wpa_supplicant dbus api
   - gpio-control interface: support gpiochip* devices
   - polkit interface: fix "rw" mount option check
   - u2f-devices interface: enable additional security keys
   - desktop interface: enable kde theming support


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.65.1
   - Support building snapd using base Core22 (Snapcraft 8.x)
   - FIPS: support building FIPS complaint snapd variant that switches
     to FIPS mode when the system boots with FIPS enabled
   - AppArmor: update to latest 4.0.2 release
   - AppArmor: enable using ABI 4.0 from host parser
   - AppArmor: fix parser lookup
   - AppArmor: support AppArmor snippet priorities
   - AppArmor: allow reading cgroup memory.max file
   - AppArmor: allow using snap-exec coming from the snapd snap when
     starting a confined process with jailmode
   - AppArmor prompting (experimental): add checks for prompting
     support, include prompting status in system key, and restart snapd
     if prompting flag changes
   - AppArmor prompting (experimental): include prompt prefix in
     AppArmor rules if prompting is supported and enabled
   - AppArmor prompting (experimental): add common types, constraints,
     and mappings from AppArmor permissions to abstract permissions
   - AppArmor prompting (experimental): add path pattern parsing and
     matching
   - AppArmor prompting (experimental): add path pattern precedence
     based on specificity
   - AppArmor prompting (experimental): add packages to manage
     outstanding request prompts and rules
   - AppArmor prompting (experimental): add prompting API and notice
     types, which require snap-interfaces-requests-control interface
   - AppArmor prompting (experimental): feature flag can only be
     enabled if prompting is supported, handler service connected, and
     the service can be started
   - Registry views (experimental): rename from aspects to registries
   - Registry views (experimental): support reading registry views and
     setting/unsetting registry data using snapctl
   - Registry views (experimental): fetch and refresh registry
     assertions as needed
   - Registry views (experimental): restrict view paths from using a
     number as first character and view names to storage path style
     patterns
   - Snap components: support installing snaps and components from
     files at the same time (no REST API/CLI)
   - Snap components: support downloading components related assertions
     from the store
   - Snap components: support installing components from the store
   - Snap components: support removing components individually and
     during snap removal
   - Snap components: support kernel modules as components
   - Snap components: support for component install, pre-refresh and
     post-refresh hooks
   - Snap components: initial support for building systems that contain
     components
   - Refresh app awareness (experimental): add data field for
     /v2/changes REST API to allow associating each task with affected
     snaps
   - Refresh app awareness (experimental): use the app name from
     .desktop file in notifications
   - Refresh app awareness (experimental): give snap-refresh-observe
     interface access to /v2/snaps/{name} endpoint
   - Improve snap-confine compatibility with nvidia drivers
   - Allow re-exec when SNAP_REEXEC is set for unlisted distros to
     simplify testing
   - Allow mixing revision and channel on snap install
   - Generate GNU build ID for Go binaries
   - Add missing etelpmoc.sh for shell completion
   - Do not attempt to run snapd on classic when re-exec is disabled
   - Packaging/build maintenance for Debian sid, Fedora, Arch, openSuse
   - Add snap debug API command to enable running raw queries
   - Enable snap-confine snap mount directory detection
   - Replace global seccomp filter with deny rules in standard seccomp
     template
   - Remove support for Ubuntu Core Launcher (superseded by snap-
     confine)
   - Support creating pending serial bound users after serial assertion
     becomes available
   - Support disabling cloud-init using kernel command-line
   - In hybrid systems, apps can refresh without waiting for restarts
     required by essential snaps
   - Ship snap-debug-info.sh script used for system diagnostics
   - Improve error messages when attempting to run non-existent snap
   - Switch to -u UID:GID for strace-static
   - Support enabling snapd logging with snap set system
     debug.snapd.{log,log-level}
   - Add options system.coredump.enable and system.coredump.maxuse to
     support using systemd-coredump on Ubuntu Core
   - Provide documentation URL for 'snap interface '
   - Fix snapd riscv64 build
   - Fix restarting activated services instead of their activator units
     (i.e. sockets, timers)
   - Fix potential unexpected auto-refresh of snap on managed schedule
   - Fix potential segfault by guarding against kernel command-line
     changes on classic system
   - Fix proxy entries in /etc/environment with missing newline that
     caused later manual entries to not be usable
   - Fix offline remodelling by ignoring prerequisites that will
     otherwise be downloaded from store
   - Fix devmode seccomp deny regression that caused spamming the log
     instead of actual denies
   - Fix snap lock leak during refresh
   - Fix not re-pinning validation sets that were already pinned when
     enforcing new validation sets
   - Fix handling of unexpected snapd runtime failure
   - Fix /v2/notices REST API skipping notices with duplicate
     timestamps
   - Fix comparing systemd versions that may contain pre-release
     suffixes
   - Fix udev potentially starting before snap-device-helper is made
     available
   - Fix race in snap seed metadata loading
   - Fix treating cloud-init exit status 2 as error
   - Fix to prevent sending refresh complete notification if snap snap-
     refresh-observe interface is connected
   - Fix to queue snapctl service commands if run from the default-
     configure hook to ensure they get up-to-date config values
   - Fix stop service failure when the service is not actually running
     anymore
   - Fix parsing /proc/PID/mounts with spaces
   - Add registry interface that provides snaps access to a particular
     registry view
   - Add snap-interfaces-requests-control interface to enable prompting
     client snaps
   - steam-support interface: remove all AppArmor and seccomp
     restrictions to improve user experience
   - opengl interface: improve compatibility with nvidia drivers
   - home interface: autoconnect home on Ubuntu Core Desktop
   - serial-port interface: support RPMsg tty
   - display-control interface: allow changing LVDS backlight power and
     brightness
   - power-control interface: support for battery charging thesholds,
     type/status and AC type/status
   - cpu-control interface: allow CPU C-state control
   - raw-usb interface: support RPi5 and Thinkpad x13s
   - custom-device interface: allow device file locking
   - lxd-support interface: allow LXD to self-manage its own cgroup
   - network-manager interface: support MPTCP sockets
   - network-control interface: allow plug/slot access to gnutls config
     and systemd resolved cache flushing via D-Bus
   - network-control interface: allow wpa_supplicant dbus api
   - gpio-control interface: support gpiochip* devices
   - polkit interface: fix "rw" mount option check
   - u2f-devices interface: enable additional security keys
   - desktop interface: enable kde theming support


author: Jan Grulich <jgrulich@redhat.com> - 1.13.1-13
changelog:
  - Rebuild (xorg-x11-server)
    CVE fix for: CVE-2024-31080, CVE-2024-31081, CVE-2024-31082 and CVE-2024-31083


author: Jan Grulich <jgrulich@redhat.com> - 1.14.0-2
changelog:
  - vncsession: use /bin/sh if the user shell is not set
  - add missing comma in default security type list


author: Jan Grulich <jgrulich@redhat.com> - 1.14.0-3
changelog:
  - Correctly handle ZRLE cursors
  - Move old log to log.old if present
  - Handle existing config directory in vncpasswd


author: Lukáš Zachar <lzachar@redhat.com> - 1.29.0
changelog:
  - Add page `Releases` to highlight important changes
  - Update and polish hardware requirement docs
  - Refactor generating of stories and lint check docs
  - Add support for pruning test directories
  - Download all sources for `dist-git-source`
  - Source plan environment variables after `prepare` and `execute` steps
  - Framework is not consulted on results provided by tmt-report-result
  - Run scripts with `sudo` when `become` is on
  - Add `retry` for pulling images in the `podman` plugin
  - Add hardware schema for GPU
  - Change the default test pidfile directory to `/var/tmp`
  - Add `device` key into the `hardware` specification
  - Update code and test coverage for the `check` key
  - Document case-insensitive context dimension values
  - Fix use of the `-name` suffix in system HW requirement
  - Correct parsing when called as `rhts`
  - Reconcile HW requirements with virtual's own options
  - Move the `README` content into `docs/overview`
  - Make `BasePlugin` generic over step data class
  - Use `UpdatableMessage` for execute/internal progress bar
  - Drop an empty line from the pull request template
  - Add `runner` property to run with test runner facts
  - Export sources of an `fmf` node
  - Bump pre-commit linters to newer versions
  - Append the checklist template to new pull requests
  - Extend tmt-reboot to allow reboot from outside of the test process
  - Allow optional doc themes
  - Use consistent style for multiword test names
  - Show `check` results in the `html` report
  - Update `where` implementation, docs & test coverage (#2411)
  - Document difference between key, field and option
  - Rename multiword keys to use dashes in export and serialization
  - Allow Path instance to be used when constructing commands
  - Switch `Logger.print()` to output to stdout
  - Replace Generator type annotation with Iterator (#2405)
  - Refactor data container helpers
  - When merging fmf and CLI, use shared base step data
  - Fix installing package from the command line
  - Add support for checks to have their data packages
  - Switch `tmt.identifier` from using `fmf.log`
  - Hide test/plan/story internal fields from export
  - Fix full test suite after recent packaging changes
  - Update the list of code owners
  - Include the `fmf` root in the tarball as well


author: Petr Šplíchal <psplicha@redhat.com> - 1.30.0
changelog:
  - Make `arch` field unsupported in the spec
  - Introduce `tty` test attribute to control terminal environment
  - Ensure the imported plan's `enabled` key is respected
  - Add support for user defined templates (#2519)
  - Update the common schema for the `check` key
  - Create a `checks` directory to store avc/dmesg checks
  - Correctly update environment from importing plan
  - Implement `tmt try` for interactive sessions
  - Use a shorter time for `podman stop` (#2480)
  - Add the `redis` server as a multihost sync example
  - Improve documentation of test checks
  - Adjust the format of Polarion test run title
  - Run all available tests only upon a user request
  - Rename `name` to `how` in test check specification (#2527)
  - Link `inheritance` and `elasticity` from the guide
  - Add the `fips` field for the `polarion` report
  - Cover `tmt.cli` with `pyright` (#2520)
  - Custom soft/hard reboot commands for the connect provision plugin
  - Add `--feeling-safe` for allowing possibly dangerous actions
  - Update docs for the `polarion` report plugin
  - Move test-requested reboot handling into test invocation class
  - Add `-i` to select an image in beaker and artemis
  - Document how to use `yaml` anchors and aliases
  - Simplify log decolorizers to support pickleable trees
  - Add description field to polarion report plugin
  - Make check plugin class generic over check class (#2502)
  - Increase verbosity of Artemis provisioning errors
  - Add more distros to the `mrack` config
  - Move the `contact` key to the `Core` class
  - Bump tmt in lint pre-commit check to 1.29.0
  - Add Python 3.12 to the test matrix
  - Move `mrack` configs into `tmt+provision-beaker`
  - Allow running upgrade from the current repository
  - Fix remote nested library fetch and add test
  - Cover tmt.options with pyright
  - Cover tmt.checks, tmt.frameworks and tmt.log with pyright
  - Cover tmt.result with pyright checks
  - Store fmf `context` in results for each test
  - Add networks to the podman provision plugin (#2419)
  - Add a dedicated exit code when all tests reported `skip` result
  - Move invocation-related fields out of `Test` class
  - Remove expected fail from `/tests/pip/install/full`
  - Convert test execution internals to use "invocation" bundle (#2469)
  - Introduce a separate page `Code` for code docs
  - Add code documentation generated from docstrings
  - Fix possible unbound variable after import-under-try
  - Add `pyright` as a `pre-commit` check
  - Add a helper for nonconflicting, multihost-safe filenames
  - Add the `whiteboard` option for `beaker` provision
  - Support timestamped logging even on the terminal
  - Enable pyupgrade `UP` ruff rule
  - Fix `UP035` deprecated-import violations
  - Fix `UP034` extraneous-parentheses violation
  - Fix `UP033` lru-cache-with-maxsize-none violations
  - Fix `UP032` f-string violations
  - Fix `UP013` convert-typed-dict-functional-to-class
  - Fix `UP009` utf8-encoding-declaration violations
  - Fix `UP006` non-pep585-annotation violations
  - Try several times to build the `become` container (#2467)
  - Add .py file extension to docs scripts (#2476)
  - Add a link to the Testing Farm documentation
  - Use `renku` as the default theme for building docs
  - Properly normalize the test `path` key
  - Add an `adjust` example for enabling custom repo
  - Drop special normalization methods
  - Disable `dist-git-init` in the `distgit` test (#2463)


author: Michal Hlavinka <mhlavink@redhat.com> - 1.31.0
changelog:
  - Simple ReST renderer for CLI help texts (#2574)
  - Generate plugin documentation from their sources (#2549)
  - Fix environment from command line updated twice (#2614)
  - Introduce a new prepare plugin for common features (#2198)
  - Remove `xfail` for the `multidict` issue on `rawhide`
  - Prevent catching avc denials from previous tests
  - Remove an obsolete workaround for `centos-stream-8`
  - Enable the `/tests/discover/libraries` test (#2222)
  - Add documentation on tmt & regular expressions
  - Fix expansion of envvar starting with `@` in fmf nodes
  - Add the `zcrypt` adapter specification
  - Allow urllib3 2.x
  - Enable `/plans/provision/virtual` for pull requests (#2558)
  - Remove the dns failures workaround
  - Fix reporting of schema errors without the `$id` key
  - AVC check now saves a timestamp on guest instead of using runner's time
  - Add check to prevent `tmt try` deleting imported libraries
  - Reduce usage of locks in the `testcloud` plugin
  - Add support for envvars import and export to Polarion
  - Use enumeration to implement action handling
  - Handle the `ctrl-d` shortcut in `tmt try`
  - Run tests with `interactive` mode during `tmt try`
  - Fix `tmt import --dry` and Polarion import file name
  - Document that `name` is supported in `--filter` search (#2637)
  - Refactor running of interactive commands (#2554)
  - Create container images from the latest non-dev copr build
  - Fail `dmesg` check if it contains `Call Trace` or `segfault`
  - Mention the reboot timeout variable in the release notes
  - Bump the default reboot timeout to 10 minutes
  - Allow change of the default reboot timeout via environment variable
  - Introduce essential requirements
  - Allow `--update-missing` to change the default `how` value
  - Document the new `become` feature
  - Raise an error when loading pre-1.24 `tests.yaml`
  - Support terminating process running test via its test invocation (#2589)
  - Fix `egrep` warning in `/plans/install/docs`
  - Test framework may provide additional test requirements
  - Improve logging of AVC check plugin and its test
  - Cleanup logging in `tmt.utils.create_file()`
  - Drop connection closed messages from test output
  - Recommend `qemu-kvm-core` for `provision-virtual`
  - Fix `/tests/plan/import` to not use special ref (#2627)
  - Improve imported plan modification test to verify the order as well (#2618)
  - Retry the `git clone` action multiple times
  - Simplify the debuginfo installation test
  - Support `virtualization.is-virtualized` in `mrack` plugin
  - Support running all or selected steps `--again`
  - Allow hardware requirements limit acceptable operators
  - Fix inheritance of some keys in provision step data
  - Run a callback when command process starts
  - Add support for hard reboot to Beaker provision plugin
  - Make collected requires/recommends guest-aware
  - Copy top level `main.fmf` during testdir pruning
  - Add support for Artemis API v0.0.67
  - Add support for `cpu.flag` hardware requirement
  - Use a different pidfile location for the full test
  - Clear test invocation data path use and derived paths
  - Add support for disallowing plugins via command line
  - Use constraint classes specific for particular value type
  - Making rhts metric value optional.
  - Ignore tarballs and generated man page
  - Cover `tmt.libraries` with `pyright` checks
  - Parallelize the `provision` step
  - Let `click` know about the maximal output width
  - Cover `tmt.identifier` with `pyright` checks
  - Extend `duration` of `/tests/core/escaping` a bit
  - Move docs templates into their own directory
  - Drop no longer needed `tmt.utils.copytree()`
  - Drop no longer used `tmt.utils.listify()`
  - Provision plugins use `self.data` instead of `self.get()`
  - Prepare and finish plugins use self.data instead of self.get()
  - Fix tmt.utils.format to allow int and float values
  - Move code-related pages under new `code` directory
  - Warn on test case not found in Polarion during report
  - Bump pre-commit linters
  - When cloning a logger, give it its own copy of labels
  - Add a `Toolbelt Catalog` entry for `tmt`
  - Enable the `avc` check for all `tmt` tests
  - Fix dmesg check test on Fedora rawhide & newer


author: Martin Hoyer <mhoyer@redhat.com> - 1.32.0
changelog:
  - Support Alpine Linux `apk` package manager
  - Update the `reportportal` plugin
  - Allow `keep-git-metadata` to be used without url
  - Use `TMT_REPORT_ARTIFACTS_URL` in Polarion report plugin
  - Prepare dist-git sources using `rpmbuild -bp`
  - Add support for `zcrypt` to Beaker plugin
  - Introduce ansible-lint to format ansible files
  - Add support for linking artifacts from the report
  - Document test tags and mark beakerlib integration
  - Clarify that plan context is not applied to plan
  - Increase the default test `duration` a bit
  - Update pre-commit checks
  - Fix typos in the `tmt try` help message examples
  - Add new environment variable for test iteration identifier
  - Select no tests if `modified-only` returns nothing (#2761)
  - Debug output for `discover -h fmf --modified-only`
  - Finish unit testing of HW transformations in mrack plugin
  - Run `/plans/install/docs` in core `packit` jobs
  - Extract "package manager" functionality into plugins (#2557)
  - Allow commands whose output is not logged unless they fail
  - Move `/tests/run/shell` to `/plans/provision/local`
  - Include a simple config for the `polarion` plugin
  - Cover `report/junit` with `pyright`
  - Implement the new test check `watchdog`
  - Support `disk.driver` hw requirement for `mrack`
  - Cover `tmt.hardware` with `pyright` check
  - Bootstrap unit tests for Beaker XML transformation of HW requirements
  - Add support for emulated TPM into virtual provision plugin
  - Set default formatting of Pint units to use symbols, not names (#2736)
  - Disable IPv6 for /plans/provision/virtual in CI
  - Add support for `disk.driver` hardware requirement
  - Remove now unnecessary `NON_KVM_ADDITIONAL_WAIT` from testcloud
  - Support `disk.model-name` hw requirement for `mrack`
  - Include `context` in the test `metadata.yaml` file
  - Pass `domain_configuration` to testcloud's `wake()`
  - Document how to enable verbose/debug logging
  - Disable password authentication when using keys
  - Fix /plans/provision/virtual to set correct PROVISION_* variable
  - Log the beaker job whiteboard
  - /usr/sbin/sestatus instead of /usr/bin/sestatus (#2720)
  - Set acl permissions on the `workdir` root
  - Extend the `duration` for time-demanding tests
  - Add support for `disk.model-name` hardware requirement
  - Move deferred user stories into a separate section
  - Mark test check tests with more fitting provision tags
  - Add `Environment` and `FmfContext` among loggable types
  - Bump supported Artemis API versions to 0.0.69
  - "Show default" flag was dropped from CLI option initialization
  - Convert environment handling into a dict-like class (#2612)
  - Enable `additional_coverage` tests for pull requests (#2700)
  - Add essential requirements to checks
  - Remove mention about the full test suite from docs
  - Use the `PROVISION_HOW` variable in `provision` plans (#2688)
  - Properly detect if test is enabled somewhere
  - Check for files in `rpm-ostree install` script
  - Collect test/test check results in test invocation (#2608)
  - Test the `become` key under `virtual` provision
  - Introduce "topology" addresses for guests (#2670)
  - Make checks smarter about environments in which they should not run (#2686)
  - Cover report/display and report/html with pyright (#2682)
  - Cover `tmt.templates` with `pyright`
  - Allow custom boot/connect timeouts for testcloud VMs
  - Underline `try` menu keys
  - Drop two no longer used methods from prepare step
  - Enable the full test execution using a label (#2683)
  - Support URL as post-install-script for Artemis plugin
  - Fix dmesg check test for recent Fedoras


author: Lukáš Zachar <lzachar@redhat.com> - 1.32.2
changelog:
  - Remove /var/tmp workdir from rpm packaging
  - Refactor package manager discovery to allow priorities
  - Add unit test for package manager installing a file system path
  - Update pre-commit checks and add a couple of new ones
  - Removing c9s workaround for pytest-container
  - Clarify the `--last` symlink creation race a bit
  - Remove the `.travis.yml` config file
  - Correctly show the `--provision-timeout` default
  - Refresh Beaker API client in mrack to use up-to-date Kerberos ticket


author: Tomáš Bajer <tbajer@redhat.com> - 1.33.0
changelog:
  - Fix installation of packages from files (#2914)
  - Simplify the documentation building (#2483)
  - Install dependencies of upgrade tasks
  - Improve fail message when library doesn't exist
  - Parse the `system` hardware requirement (#2795)
  - Define `location.lab-controller` hardware requirement (#2794)
  - Test restart on crash (#2870)
  - Add `codespell` pre-commit and fix revealed errors
  - Add test restart counter, similar to `TMT_REBOOT_COUNT`
  - Fix error message if no supported package manager found
  - Fix copy/paste issue for `combine_hw_disk_size()`
  - Slightly improve rendering of ReST for command like
  - Allow `duration` in the `execute` schema
  - Log hash of the beakerlib library repo
  - Fix inability of rpm-ostree to install multiple packages (#2887)
  - Fix Alpine Linux support (#2828)
  - Allow custom failure patterns in `dmesg` test check
  - Make `junit_xml` more visible to linters
  - Add support for `virtualization.hypervisor` hardware requirement (#2733)
  - Add a new section `Review` to contributor docs
  - Accept SSH options from environment variable (#2783)
  - Fix AVC denial detection on Fedora rawhide (#2881)
  - Reuse "become" image to fix sudo-related trouble in /tests/provision/user (#2892)
  - Polish prepare/ansible documentation
  - Support `cpu.cores` hardware requirement for mrack (#2728)
  - Allow pip install from git-archive
  - Add the `cpu.vendor` hardware requirement
  - Fix incorrect translation of `cpu.processors` to Beaker
  - Document custom Jinja template filters (#2769)
  - Update logger-name for clean


author: Martin Hoyer <mhoyer@redhat.com> - 1.34.0
changelog:
  - Fix normalization of `hardware` key/option (#3015)
  - Keep patched sources directly in TMT_SOURCE_DIR (#2999)
  - Copy launch description to suite description (#2992)
  - Add support for multiple disks to testcloud plugin (#2767)
  - Improve rendering of story links in our docs (#3001)
  - Simplify parsing of HW requirements and add missing ones (#2928)
  - Make test shell wrapper filename even more unique (#2998)
  - Add support for basic rerun of tests (#2521)
  - Split provision/virtual plans to subgroups per step (#2938)
  - Document custom container images built for tmt tests (#2930)
  - Require python3.9 in 'develop' target
  - Fix multiple rules `adjust` example in `duration` spec (#2971)
  - Fix "skip missing" behavior when installig debuginfo packages with dnf (#2956)
  - Extend results schema to allow test phases (#2933)
  - Fix path to watchdog log (#2901)
  - Display locals in traceback when requested (#2900)
  - Polish test-check/dmesg documentation (#2897)
  - docs: tweak docs to include how to see details about test failures (#2541)
  - Allow multiplication in duration input value (#2845)
  - Fix validation of fmf id URL, it must be cloneable first (#2957)
  - Cover `tmt.trying` with `pyright` check (#2942)
  - Clarify the `trigger` context dimension values (#2961)
  - Add konflux as possible initiator (#2947)
  - Fix some invalid links in documentation (#2940)
  - Define "block-device" key for guest topology HW exposition
  - Cover tmt.steps.prepare.shell with pyright checks
  - Ignore report files created by pytest-html
  - Fix pre-commit typing python version (#2959)
  - Cover tmt.steps.prepare.distgit with pyright
  - Pass correct spec to _parse_system and _parse_location (#2924)
  - Support `cpu.model-name` hardware requirement for mrack (#2921)
  - Enforce "one blank line after class docstring" rule (#2934)
  - Enable pydocstyle checks in ruff (#2906)
  - Update distros in the `mrack` provisioning config (#2932)
  - Drop duplicate list of supported HW requirements in beaker plugin (#2902)
  - Update interaction with Fedora rawhide (#2931)
  - Run the `no-commit-to-branch` check only locally


author: Packit <hello@packit.dev> - 0.17.16-1
changelog:
  <!-- generated by eloquent/github-release-action -->
  <!-- original source:
  - preload: Wrap __getcwd_chk()
  - uevent_sender: Fix fd leak in sendmsg_one
  - Fix gcc -fanalyzer complaints
  -->

  <ul>
  <li>preload: Wrap __getcwd_chk()</li>
  <li>uevent_sender: Fix fd leak in sendmsg_one</li>
  <li>Fix gcc -fanalyzer complaints</li>
  </ul>


author: Packit <hello@packit.dev> - 0.17.17-1
changelog:
  - Fix race with worker thread accessing $UMOCKDEV_DIR
  - Disable -Wincompatible-function-pointer-types for clang


author: Packit <hello@packit.dev> - 0.17.18-1
changelog:
  - preload: Don't read udev cache data from system (thanks Bastien Nocera)
  - spec: Update License: to SPDX format
  - Various test fixes


author: Packit <hello@packit.dev> - 0.18.0-1
changelog:
  - Record and restore SELinux context for mocked /dev nodes
  - preload: wrap fstatfs() and statfs() on musl
  - Fix build with meson 1.4


author: Packit <hello@packit.dev> - 0.18.1-1
changelog:
  - preload: Provide wrappers for functions specific to 64-bit time_t (thanks Steve Langasek)
  - preload: Fix building with _FILE_OFFSET_BITS (thanks Zixing Liu and Steve Langasek)


author: Packit <hello@packit.dev> - 0.18.4-1
changelog:
  - Add ioctls for Chromium OS EC devices (thanks Abhinav Baid)
  - Generate "remove" uevent in umockdev_testbed_remove_device() (thanks Bob Henz)
  - Recursively remove children with uevents (thanks Bob Henz)
  - preload: Fix sigmask block and restore race (thanks barath)


author: Andrew Bauer <zonexpertconsulting@outlook.com> - 5.7.2-2
changelog:
  - RHBZ#2308628 RHBZ#2308629 RHBZ#2308630 RHBZ#2308631 fixed in 5.7.2 release
  - fips macro patch no longer needed


